Autel G-BOX2 Key Programming Adapter for Mercedes & BMW

Autel G-Box 2 Overview:

The Autel G-BOX2 is an adapter compatible with Autel's IM508 (with purchase of XP400 programmer) and IM608 Key Programming tablets wont to aid within the programming keys for Mercedes DAS3 CAN EIS/EXS in an ALL Keys Lost situation.
The G-Box2 also supports DME/DDE ISN Reading and Writing in Boot Mode on applicable BMW vehicles.
The bench Method is additionally supported. All Keys Lost password calculations are 4x to 8x faster.
Moreover, the amount of insertions and removals of W216 and W164 EISs after the year 2009 is reduced to zero, greatly simplifying the operation steps.
It is often utilized in Boot Mode or Bench Method. G-BOX2 must be used with the Autel IM508 or IM608 for reliable performance.

Autel G-Box 2 Features:

The Autel G-BOX2 realizes fast mode on the vehicle and bench when all keys of Mercedes Benz vehicles using the DAS3 EIS/EZS are lost. The use of the G-BOX2 reduces the time needed and eliminates the process of insertion and removal.
The Autel G-BOX2 can read and access most engines manufactured by Bosch including EDS/ MEx17 series engines used in BM-W and Volkswagen Vehicles. This capability supports the ability to perform adaptions when all keys are lost and the engine is replaced.
The G-BOX2 is compatible with the Autel’s advanced diagnostic tablets supports IMMO and key programming functions.

• Supports Mercedes Benz All Keys Lost, faster calculates password
• Supports IM608 or IM508 with XP400
• Used for Faster Mercedes ECU data and EIS password calculation
• Mercedes DAS3 can EIS/EZS all keys lost
• Reduces reading time of W204 ECU data & W207 EIS by over 85%
• No need to remove and reinsert the key for W221 & W164 after 2009 models
• Can read and write BMW DME/DDE ISN in boot mode
• Compatible with Auro IM600 & Auro IM100 with XP400

Autel G-BOX2 Connections Explanations:

1. DC Port - Provides +12V DC power supply.
2. CAN-H Port - Universal CAN bus interface, connects with OBDII Pin6
3. K1 Port - Universal K-Line interface, connects with OBDII Pin1
4. Status Indicator - Indicates the current operating status
5. Relay Ports - Connect with dedicated relay cables
6. +12V Power Port - Universal power input/ output port
7. OBDII Connector - Connects to the vehicle's OBDII directly or via a dedicated extension cable
8. OBDII Female Connector - Connects to the main cable of the Autel diagnostic tablet
9. CAN-L Port - Universal CAN Bus interface, connects with OBDII Pin14
10. K7 Port - Universal K-Line interface, connects with OBDII Pin7
11. GND Port - Universal power input/ output port
12. DB15 Port - Used with dedicated DB15 cable for reading and writing multiple types of ECUs

How to Connect the Autel G-BOX2 Step by Step:

• Plug the G-Box into the Mercedes Benz EIS using the packed DB15 Cable
• Plug into the DC port of the G-Box using a power adapter (DV 12V)
• Plug the G-Box into the Autel Diagnostic Tablet (MaxiIM IM608, IM508)

What is the Difference between Autel G-Box1 & Autel G-Box2

• Both Support Mercedes DAS3 add keys and all keys lost on the bench.
• Both Support Mercedes DAS3 all keys were lost on the vehicle.
• Both Supports Reading engine control module password by boot.
• Only Autel G-Box2 Supports Read Bosch ME/MED/MEVD/EDC 17 Engine control module passwords on the bench.

Autel G-Box 2 Box Contains:

• 1pc x Autel G-BOX2
• 1pc x DB15 Cable
• 1pc x K-Line Cable
• 1pc x Fuse Cable
• 2pcs x Fuse (5A)
• 2pcs x Clamp Cable
• 1pc x OBDII Extension Cable
• 1pc x Quick Reference Guide

Autel G-BOX2 Key Programming Adapter for Mercedes & BMW

Specifications:

Item Specifications:

• Product Code: ABK-1408
• Manufacturer: Autel [Genuine]
• OEM Part Number: Autel G-Box2