Mercedes Benz ECU Renew Cable For ME9.7 / 272-273 For VVDI MB BGA Programmer

Mercedes Benz ME9.7 ECU cable overview:

The Mercedes Benz ECU cable can be used to renew Mercedes ME9.7 (272-273) ECU with Mercedes key programming devices via the OBD interface on the bench, the Mercedes Benz ME 9.7 ECU cable can be used for connecting to diagnostic devices to scan the ECU fault code, test the ECU if it is working well or not through the vehicle's OBD interface

The Mercedes Bosch ME9.7 ECU cable has been tested using Xhorse VVDI MB

Mercedes ME9.7 ECU renew cable supported devices:

• Xhorse VVDI Mercedes key programmer ABK-3674
• CGDI Mercedes key programmer

Mercedes Benz ECU renew cable supported models:

• Mercedes Benz Bosch ME 9.7 272.xxx ECU renewing
• Mercedes Benz Bosch ME 9.7 273.xxx ECU renewing

How to renew Mercedes ECU ME9.7 (272-273) using VVDI MB:

• Install VVDI MB software in your computer
• Open the VVDI BGA software
• Connect the Mercedes Bosch ME9.7 (272-273) ECU & Mercedes ME9.7 Bosch ECU renew cable to the VVDI OBD plug and connect 12V to it
• Press renew ECU / gearbox button
• Choose ECU module
• Click read
• Click get erase pass, it will take a few seconds to calculate the erase password online
• press renew button
• now the ECU is renewed and can be programmed to another vehicle

Mercedes Benz ECU Renew Cable For ME9.7 / 272-273 For VVDI MB BGA Programmer

Specifications:

Supported Models:

Item Specifications:

• Product Code: ABK-2540
• Manufacturer: Xhorse [Genuine]

Fitments:

• MERCEDES ALL MODELS
• XHORSE ALL MODELS