Remote Examiner RFID & IR Signal Tester
![Remote Examiner RFID & IR Signal Tester - ABK-3433 - ABKEYS.COM]()
![Remote Examiner RFID & IR Signal Tester - ABK-3433 - ABKEYS.COM]()
-31%
Remote Examiner RFID & IR Signal Tester
- Product SKU: ABK-3433
- Category: Key Programming Devices - OBD Key Programmers
- Vendor: ABKEYS
Available:In Stock
$135.00
$195.85
Remote Examiner overview:
The Remote Examiner device enables you to check the serviceability and signal power for remote controls like Radio Frequency 315Mhz, 433Mhz, 868Mhz, Infrared signal & Vehicles transponder coil signal.
Functions:
- Radio Frequency Remote Control Operation Checking (0Mhz - 1.2Ghz)
- Infrared (IR) Remote Control Operation Checking
- Lead Backlight that can be turned on and off while using to save battery
- Battery Voltage Indicator
- Auto Power Off after 45 seconds
- USB cable (Plugged to a power outlet or PC/ Laptop) to use the device without battery
Basic Operations:
- Press the Power button for 3 seconds to switch on Remote Examiner
- Press Select button to shift between modes (Radio, Coil & Infrared)
- The Radio Frequency value and Battery voltage (Voltage Supply Detector) will appear on LCD Screen.
- Place the remote control over the device and press any button.
- Check the operation for all remote's buttons.
Infrared Remote Control Checking:
- Select I-Red mode, point IR remote control at the receiver located at the top of the device and press any button on remote control.
- Buzz sound will be heard and battery level will be displayed on the device's screen.
- Press the power button for 3 seconds to switch the device off.
Vehicles Transponder Coil Signal Checking:
- Simply select COIL mode, place Remote Examiner near the testing source (eg. Near ignition lock and turn ignition ON)
- Frequency of the radio transmission and the level of a signal will be displayed on LED screen if the ignition coil works properly.
Auto Power Off:
- The device will turn off automatically if it does not detect external input signals (RF and IR) for approximately 45 seconds when it is on batter mode
- Remote Examiner does not turn off automatically when it is connected to USB power.
Remote Examiner RFID & IR Signal Tester
Specifications:
| Product Code | ABK-3433 |
| Manufacturer | ABKEYS |
| Condition | Brand New |
Item Specifications:
- Product Code: ABK-3433
- Manufacturer: ABKEYS
Remote Examiner overview:
The Remote Examiner device enables you to check the serviceability and signal power for remote controls like Radio Frequency 315Mhz, 433Mhz, 868Mhz, Infrared signal & Vehicles transponder coil signal. Functions:- Radio Frequency Remote Control Operation Checking (0Mhz - 1.2Ghz)
- Infrared (IR) Remote Control Operation Checking
- Lead Backlight that can be turned on and off while using to save battery
- Battery Voltage Indicator
- Auto Power Off after 45 seconds
- USB cable (Plugged to a power outlet or PC/ Laptop) to use the device without battery
- Press the Power button for 3 seconds to switch on Remote Examiner
- Press Select button to shift between modes (Radio, Coil & Infrared)
- The Radio Frequency value and Battery voltage (Voltage Supply Detector) will appear on LCD Screen.
- Place the remote control over the device and press any button.
- Check the operation for all remote's buttons.
- Select I-Red mode, point IR remote control at the receiver located at the top of the device and press any button on remote control.
- Buzz sound will be heard and battery level will be displayed on the device's screen.
- Press the power button for 3 seconds to switch the device off.
- Simply select COIL mode, place Remote Examiner near the testing source (eg. Near ignition lock and turn ignition ON)
- Frequency of the radio transmission and the level of a signal will be displayed on LED screen if the ignition coil works properly.
- The device will turn off automatically if it does not detect external input signals (RF and IR) for approximately 45 seconds when it is on batter mode
- Remote Examiner does not turn off automatically when it is connected to USB power.
Remote Examiner RFID & IR Signal Tester
Specifications:
| Product Code | ABK-3433 |
| Manufacturer | ABKEYS |
| Condition | Brand New |
Item Specifications:
- Product Code: ABK-3433
- Manufacturer: ABKEYS
ABK-3433 Remote Examiner Tester Manual
