In this article we explain How to Use & Program the Xhorse XKGHG1EN Masker Garage Remote Control ABK-1015-XKGHG1EN

Unlock the seamless functionalities of the Xhorse XKGHG1EN Masker Garage Remote Control, a uniquely designed, customer-friendly Remote Control that supports various functions such as remote cloning, frequency setting, code deletion, and data recovery. Plus, it supports remote generation for a plenty of garage remote brands and allows frequency editing via VVDI key tool programming device series.

🛍️ Purchase Now: The Most advanced Universal garage remote is available on our website ABK-1015-XKGHG1EN. Visit Our Website  www.abkeys.com to explore great offers and deals on this product and more!

Xhorse Masker Garage Remote Step-by-Step Remote Programming & Usage Guide

1. Initial Setup: Ensure the Delete Code Status

Before diving into the cloning function, it's pivotal to verify the garage remote's delete code status and ensure it's correctly set.

• Delete Code Status Verification: The LED should flash once and then quickly go out when any button is continuously pressed.
• Delete Code Operation:
  • Press and hold “Up” and “Down” simultaneously until the LED turns on. Continue holding until the LED turns off, then release.
  • Press and hold “Pause” until the LED extinguishes, signaling a successful code deletion.

2. Cloning: Xhorse XKGHG1EN Garage Remote Cloning Steps

• Xhorse XKGHG1EN Masker Garage Remote Preparation:
  • Confirm the garage remote is in delete code status.
  • Ensure the garage remote frequency matches the original remote to avoid cloning issues.
• Xhorse XKGHG1EN Masker Garage Remote Cloning Steps:
  • Press and hold any button on the Xhorse garage remote until the LED flashes once, entering cloning mode.
  • Holding the original remote next to the Xhorse remote, press and hold the corresponding button. LED illumination indicates successful cloning.
  • Repeat for all buttons.

3. Frequency Setting: Ensuring Operational Harmony

• How To Set Frequency of the Xhorse Remote Masker:
  • Different aftermarket remote brands might operate at varied frequencies.
  • If the original and Xhorse garage remote frequencies differ, issues might occur despite successful cloning.
  • The Xhorse garage remote supports frequency setting (20 frequency points) to match the original remote's frequency.
• Frequency Setting Steps:
  • Enter 'Set Frequency Mode': Press “Lock” and “Pause” together until the LED turns off, then release.
  • To set the frequency, press “Up” once for each frequency point (LED flashes correspondingly). Refer to the frequency reference table.
  • After 5 seconds of successful frequency setting, the remote LED will flash, with the number of flashes indicating the set frequency.
  • To exit the mode, press “Lock” and “Pause” together after the LED stops flashing.

4. Utilizing the Rolling Code ID Generation Function

• Xhorse XKGHG1EN Masker Garage Remote Rolling Code ID Regeneration:
  • If code chasing (i.e., the need to press the cloned remote twice to function) occurs, it can be rectified by programming the remote after rolling code ID regeneration.
• Regeneration Steps:
  • Enter regeneration mode: Press “Up” and “Lock” until the LED goes off.
  • Regenerate rolling code ID: Release “Up” and “Lock”, press “Pause” until the LED goes off.
  • Note: Post-regeneration, the garage remote must be programmed again by operating the learning and matching processes as per the control box instructions.

5. Xhorse XKGHG1EN Masker Remote Data Recovery

• Xhorse XKGHG1EN Masker Garage Remote Data Recovery Situation:
  • If code is deleted by mistake, the data recovery function can be utilized.
• Data Recovery Steps:
  • Press and hold the two buttons” Down” and “Pause” for 3 seconds, remote LED lights on, data recovery operation is successful.

🌐 Buy Xhorse Garage Remote Online: Navigate to www.abkeys.com and explore a wide range of Xhorse products, along with exclusive ABKEYS special offers and deals.

Conclusion: The Xhorse Garage Remote Programming Guide and Garage Remote Cloning and Frequency Setting manual ensure you can effectively leverage the Xhorse remote code management system to secure and simplify your garage access. Should you need to buy Xhorse garage remote online, remember that our website is your one-stop destination, providing a myriad of supported garage remote brands and models and unmissable deals.

You Can View all Xhorse Remotes Here!